1472 SERIES CONSOLE CABINET - NEMA 12
Sloped Front Modular Console Cabinet


Basic Console

Turret

Writing Surface

Application
  • Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
  • Heavy-duty construction provides protection from dirt, dust, oil and water. Sloping front control and instrument panels provide an ideal surface for mounting operator controls or instrumentation.
  • Interior mounting is provided for with a removable inner panel located on the rear of the basic console.

Standards

  • UL 508 Type 12 as marked¹
  • CSA Type 12
  • Complies with
    • NEMA Type 12
    • IEC 60529, IP6

Construction

Basic Console

  • Formed 14 gauge steel.
  • Smooth, continuously welded seams, without knockouts, cutouts or holes.
  • Sloped front instrument panel is continuously hinged on the front (bottom) edge and secured with captive panel screws, threaded into sealed wells.
  • Front instrument panel may be removed by pulling the hinge pin.
  • Flush doors are secured with a three point latch and operated with a key locking automotive type handle.
  • Two door models have overlapping front doors, with three point latch on right door.
  • Oil resistant gaskets are permanently secured and mechanically retained.
  • Includes a removable inner panel formed from 12 gauge steel, mounted to the back of the enclosure interior.
  • Collar studs are provided for mounting inner panels.
  • A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
  • A literature pocket is provided.

Turret

  • Formed and welded from 14 gauge steel.
  • Sloping instrument panel and vertical rear access are completely removable.
  • Oil resistant gaskets are permanently secured and mechanically retained.
  • Captive panel screws fasten into sealed wells.

Writing Surface

  • Formed and welded from 14 gauge steel.
  • Fastens to the front of the console with screws

Finish

  • Console, turret and writing surface are phosphat­­ized and finished in ANSI 61 gray powder coating on the outside and on the inside.
  • Removable inner panels are finished in white powder coating.
Accessories
  • Air conditioners
  • Casters
  • Heaters
  • Louvered ventilating plates
  • Window kits

 

 Basic Console Dimensions
Part No. Overall Dimensions Clear Opening Door Opening Sub Panel Ship
Wt. lbs.
A B C D E F I J K L M N Height Width
1472-24¹ 40 24 20 36 17 5 19.06 27.68 20.25 28.94 2.56 2.62 18.75 27.25 140
1472-36 36 36 24 32 20 10 31.06 21.56 32.25 22.88 4.81 2.00 30.00 32.00 195
1472-48² 36 48 24 32 20 10 43.06 21.56 44.25 22.88 4.81 2.00 42.00 32.00 245
 Panel Dimensions
Console
Part No.		 Console Control Panel Turret Instrument Panel Turret Rear Access Panel
Height Width Opening Size Height Width Opening Size Height Width Opening Size
1472-24 13.96 23.18 12.50 21.50 14.91 23.18 13.37 21.62 12.31 20.18 10.75 18.62
1472-36 13.00 35.18 11.50 33.50 19.18 35.18 17.62 33.62 16.31 32.18 14.75 30.62
1472-48 13.00 47.18 11.50 45.50 19.18 47.18 17.62 45.62 16.31 44.18 14.75 42.62