Browse the complete Hammond Manufacturing Electrical Enclosures catalog and discover why Hammond is #1 in selection!
1414 N4 PH Series Enclosures - NEMA 12, 13, 4
Continuous Hinge, Clamped Cover
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Standards
- UL 508 Type 3R, 4, 12 and 13
- CSA Type 3R, 4, 12 and 13
- Complies with
- NEMA Type 3R, 4, 12 and 13
- JIC EGP-1-1967 unless marked¹
- IEC 60529, IP66
Construction
- Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Welded brackets provide for enclosure mounting.
- Continuous hinged cover is secured with stainless steel clamps and screws.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.
- Oil resistant gaskets are permanently secured.
- All models larger than 4" x 4" include a removable 14 gauge inner panel.
- Internal threaded weld studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
Finish
- Cover and enclosure are phosphatized, finished in recoatable smooth ANSI 61 gray powder coating.
- Removable inner panel is finished in white powder coating.
Accessories
| Part No. With Panel |
Part No. Without Panel |
Panel Size | Centers | Cover Dimensions |
Ship Wt. lbs | |||||||||||||
| A | B | C | D | E | F | G | H | J | L | T | V | Y | with Panel | w/o Panel | ||||
| - | 1414N4PHA¹ | 4.0 | 4.0 | 3 | - | - | - | 4.75 | 2.00 | 2.60 | 5.50 | 4.31 | 4.31 | 3.00 | - | - | - | 1 |
| 1414N4PHC¹ | 1414N4PHCLP¹ | 6.0 | 4.0 | 3 | 4.88 | 2.88 | 2.5 | 6.75 | 2.00 | 2.60 | 7.50 | 6.31 | 4.31 | 3.00 | 0.31 | 0.56 | 3 | 2 |
| 1414N4PHG | 1414N4PHGLP | 8.0 | 6.0 | 3.5 | 6.75 | 4.88 | 3 | 8.75 | 4.00 | 3.10 | 9.50 | 8.31 | 6.31 | 5.00 | 0.25 | 0.63 | 6 | 5 |
| 1414N4PHE | 1414N4PHELP | 6.0 | 6.0 | 4 | 4.88 | 4.88 | 3.5 | 6.75 | 4.00 | 3.60 | 7.50 | 6.31 | 6.31 | 5.00 | 0.31 | 0.56 | 5 | 4 |
| 1414N4PHI | 1414N4PHILP | 10.0 | 8.0 | 4 | 8.75 | 6.88 | 3.5 | 10.75 | 6.00 | 3.60 | 11.50 | 10.31 | 8.31 | 7.00 | 0.25 | 0.63 | 10 | 9 |
| 1414N4PHI6 | 1414N4PHI6LP | 10.0 | 8.0 | 6 | 8.75 | 6.88 | 5.5 | 10.75 | 6.00 | 5.60 | 11.50 | 10.31 | 8.31 | 7.00 | 0.25 | 0.63 | 12 | 11 |
| 1414N4PHK | 1414N4PHKLP | 12.0 | 10.0 | 5 | 10.75 | 8.88 | 4.5 | 12.75 | 8.00 | 4.60 | 13.50 | 12.31 | 10.31 | 9.00 | 0.25 | 0.63 | 15 | 14 |
| 1414N4PHL6 | 1414N4PHL6LP | 12.0 | 12.0 | 6 | 10.75 | 10.88 | 5.5 | 12.75 | 10.00 | 5.60 | 13.50 | 12.31 | 12.31 | 11.00 | 0.25 | 0.63 | 25 | 24 |
| 1414N4PHM6 | 1414N4PHM6LP | 14.0 | 12.0 | 6 | 12.75 | 10.88 | 5.5 | 14.75 | 10.00 | 5.60 | 15.50 | 14.31 | 12.31 | 11.00 | 0.25 | 0.63 | 21 | 20 |
| 1414N4PHO6 | 1414N4PHO6LP | 16.0 | 14.0 | 6 | 14.75 | 12.88 | 5.5 | 16.75 | 12.00 | 5.60 | 17.50 | 16.31 | 14.31 | 13.00 | 0.25 | 0.63 | 26 | 24 |
| 1414N4PHM8 | 1414N4PHM8LP | 14.0 | 12.0 | 8 | 12.75 | 10.88 | 7.5 | 14.75 | 10.00 | 7.60 | 15.50 | 14.31 | 12.31 | 11.00 | 0.25 | 0.63 | 22 | 20 |
| 1414N4PHO10 | 1414N4PH010LP | 16.0 | 14.0 | 10 | 14.75 | 12.88 | 9.5 | 16.75 | 12.00 | 9.60 | 17.50 | 16.31 | 14.31 | 13.00 | 0.25 | 0.63 | 28 | 26 |
| ¹ Does not meet JIC requirements | ||||||||||||||||||